This website uses cookies to improve your browsing experience. By continuing to browse, you are agreeing to our use of cookies as explained in our Cookie Policy.
Master BV290DV Marquee Kit With 3 Metre Ducting, Analog Thermostat & Accessories BV290MKP7
85 Kw | 290,000 BTU | Analog Thermostat | 3 Metre Ducting & Accessories | Diesel Oil or HVO 100 BioFuel
NEW Marquee Kits:
Marquee Kits as they are known in the trade are not just used for heating Event Marquees but are also used extensively where there is limited or poor ventilation such as: Warehousing, Workshops and Portable Accommodation.
The heater is placed outside of the enclosed area and using the accessories supplied with each kit ducting is used to direct the heat to where it is needed for environments with limited ventilation.
Indirect heaters are highly efficient and provide 100% clean, dry and fume free air.
The Master range of indirect heaters range from 20kW or 71,700 Btu to 225kW or 768,000 Btu and are available in Dual voltage or 240 volt dependent on the model.
Complemented by a full range of accessories including room thermostats, ducting kits and exhausts there is a package for most indirect heating requirements.
Depending on the space you are looking to heat will depend on the size of your heater.
Please Note: We have many variations of Marquee Kits and can create a bespoke kit upon request. simply provide us with the dimensions of the area you are looking to heat along with the makeup of the buildings structure.
This Marquee Heater Kit comprises of the following accessories:
1 x BV290DV Indirect Dual Voltage Diesel Heater.
1 x Analog 10 Metre Wired Thermostat for setting the room temperature.
1 x 3 Metre Flexi Ducting for directing the warm air in the direction required.
1 x Diffuser which fits on the end of the ducting to block access to the ducting.
1 x Adaptor Ring for connecting the ducting to the heater.
1 x 1 Metre Stainless Steel Exhaust Pipe for ventilating fumes away from the heater
1 x Stainless Steel Exhaust Rain Lid to stop rain or anything entering the Exhaust Pipe.
For full specifications of the Indirect Heater supplied in this Marquee Kit please click on the specifications tab below.
If you require any further technical advice regarding the right heater for your application please contact any member of our sales team.
Fuel Type : | Diesel Oil or HVO 100 BioFuel |
Voltage : | Dual Voltage 110 or 240 Volt |
Heating Power (Kw) : | 85 Kw |
Heating Power (Btu) : | 290,000 Btu |
Heating Power (Kcal) : | 73,100 Kcal |
Thermostat Control : | Analog (Included) |
Thermostat Control : | Digital (Optional Extra) |
Air Displacement : | 3,300 M3/h |
Air Pressure : | 12 Bar |
Fan Type : | Axial |
Power : | 1060 Watts |
Rated Current : | 4.6 Amp |
Fuel Tank Capacity : | 105 Litres |
Fuel Consumption : | 8.1 Litres Per Hour |
IP Rating : | IP44 |
Air Outlet Diametre (Single) : | 1 x 40cm (Standard) |
Air Outlet Diametre (2 Way) : | 2 x 31cm Splitter (Optional Extra) |
Air Outlet Diametre (4 Way) : | Not Available |
Ducting Diametre (Single) : | 45cm (Standard) |
Ducting Diametre (2 Way) : | 31cm 2 Way Splitter |
Ducting Diametre (4 Way) : | Not Available |
Ducting : | Optional Extra |
Exhaust Tube Diametre : | 15cm |
Exhaust x 1 Metre : | Optional Extra |
Exhaust Rain Lid : | Optional Extra |
Length : | 160cm |
Width : | 70cm |
Height : | 115cm |
Forklift Slots : | Not Available |
Trolley Wheel Kit : | Included |
Noise Level : | 78 db(A) |
Weight : | 101kg |